SRTM

From PathlossWiki
Revision as of 16:00, 7 December 2016 by Chrisg (Talk | contribs)

Jump to: navigation, search

Contents

Information

There are 2 ways that SRTM data can be used with Pathloss 5. The data can be configured as a DEM and used for all profile and background generation or it can be used as clutter database, where the difference in elevation, when compared to a bare earth DEM (such as NED) is assigned to the clutter height. Both sets of instructions are shown below.

Always use version 2 data if available. Version 2 has been cleaned up and most of the blanks, spikes and wells have been fixed.

How to download

Currently we recommend using the 1" SRTM data available from http://e4ftl01.cr.usgs.gov/SRTM/SRTMGL1.003/2000.02.11/. This data is available for the world from latitude 60 degrees south to 60 degrees north. An Earthdata account is required to download this data. To sign up for an Earthdata account, go to https://urs.earthdata.nasa.gov/users/new.

The files represent 1x1 degree blocks withe naming representing the South Western corner of the block. The data files will have the extension .SRTMGL1.hgt.zip.

You can also use the download tool described below to download 1x1 degree blocks by coordinates.

Pathloss SRTM download tool

FetchSRTM - Tool for finding and downloading terrain data.

Older SRTM Site

(This is no longer our recommended source for SRTM data)

The main SRTM download site is found at: http://dds.cr.usgs.gov/srtm/


How to use the SRTM data with the Pathloss 5 program.

Click Configure - Set GIS configuration

GIS-SRTM.JPG

Click the Primary DEM tab and select SRTM (World) from the Digital elevation model drop down list.

Click the File index button and a new window will appear. In the menu of the new window click Files ,Import index and SRTM hgt files.

SRTM-index.JPG

Browse to locate the HGT files you have downloaded (You can select many HGT files at once by holding Ctrl or Shift while selecting files). Click Open and the files will be added to the index list.

Note the edges of the SRTM file(s) and ensure that they cover the area of your project. In other words, make sure that the sites coordinates fall within the rectangle bounded by the North, South, East and West edges as listed for the SRTM file(s) in the index.

You have now configured Pathloss 5 for SRTM terrain data.

How to use the SRTM data with the Pathloss 4 program.

You will need the latest version of the Pathloss program.

The SRTM data uses the WGS84 datum. Your coordinates will be transformed automatically.

In the Pathloss program click "Configure" – "Terrain Database" and select "SRTM" from the drop down list. Click Setup Primary (or Secondary depending on your selection). Click "File" then "BIL-HDR-BLW" and browse to find and load a file with the HGT extension. The program is now setup to use the selected SRTM file.